MaxxVapor Elite T200 Atomizer
The new T200 atomizer is designed for ELITE and ELITE XL Batteries. The Atomizer has a big holding tank for 2ml of e-liquid. Bottom coil means liquid is always where it needs to be - on the wicks! Coil is replaceable! Works better and costs less - Wow! Clear colors allow user to see when more liquid is needed. The result is dramatic. More time before refilling.
INSTRUCTIONS: Video Below
Fill T200 before using!
Turn tank
reservoir upside down and unscrew silver bottom cap. Pour e-liquid down inside
wall (not center air flow tube). Fill to below center tube.
Make sure
coil is screwed down inside cap and replace tank. DO NOT OVER TIGHTEN OR CROSS THREAD!
Let new
coil saturate in liquid for 2 minutes before first use!
Always
allow coil to cool before refilling.
If liquid
gets in the center tube, airflow will be obstructed. To fix this, remove the
T200 from the battery. Hold a tissue underneath and blow through the mouthpiece
to expel the liquid. Dry the T200 and Elite battery connections before reassembling.
Always dry
the Elite battery connection before charging.
To replace
the coil in the T200,
start by unscrewing the bottom cap. The coil is in the bottom cap and has a
ridged post sticking up. Twist this post counterclockwise to remove the old
coil. Screw the new coil in its place and reattach to filled tank. Always allow
new wicks to saturate for 5 minutes before use! Order replacement coils here: T200 Replacement Coil